What Can You Do Revive Antique Furniture with Modern Restoration?

Antique furniture restoration is very much in fashion right now. People are now understanding how it is good for the furniture as well as their finances. At first, to revive a piece of antique furniture and start restoration in Hobart, you have to start by cleansing the specific wood furniture. And then repair the damaged area, then sand the surface, and put a wax or sealant on the exterior.

Sometimes, a beginner just can not do justice to the furniture like an expert can. But there are things that you can do to help your furnishings, but always remember your work is not going to be the same as a professional. 

What Are the Things You Can Do To Revive Antique Furniture with Modern Restoration Techniques? 

Clean the Surface 

To understand the furniture, you have to first clean the surface of that furniture. As a rule, a mild liquid diluted with water is more than sufficient. And for stubborn stains, which can be removed with cleaning chemicals like white spirit. But first, you should always test whether the furniture can withstand the harshness of the chemical.

Once fully cleaned, it is now time to take a closer look at the condition of your furniture. Are there any scratches, cracks, or dents? Or any kind of discoloration?

Stability & Functionality

The next step is to restore the functionality and stability of the furniture so that it can be used safely. Antique furniture restoration in Hobart often starts with replacing glue joints that have become weak over time. Carefully proceed to remove the old glue with a chisel and coat both joints with a fresh coat of wood glue. Then replace any dowels that are no longer needed.

If there is a hinge that can no longer be fastened with screws, then it might be time to remove and replace it completely. 

Remove Water Stains

Water can severely damage wooden furniture, leaving it with light or dark stains. Shallow stains can be polished away easily with just a cotton cloth and some furniture polish. If water has penetrated deeper into the wooden fibers, you can try treating the stain by applying cooking oil or salt. 

If neither method helps, then you may have to sand and reseal the wood with the help of a professional antique furniture restoration service in Hobart. 

Repair Cracks & Holes

Scratches, cracks, and holes in old wooden furniture can be easily filled with wood paste, wax, or even special wood putty. When choosing a shade for any kind of wax or putty, it is better to choose a shade darker than the wood so that the repaired area is much less noticeable later. Fill deeper holes and cracks in several layers. Then, apply the same paint treatment that you are using to restore antique furniture from Hobart's colonial era. 

Sand, Paint & Polish

Before applying a new finish, you must first sand wood furniture. This process can be done effortlessly and quickly with a sander. Always work in the direction of the grain. For the curves of the furniture, you can use fine-quality steel wool. Remove any kind of loose shavings easily with your vacuum cleaner. Use a stripper for the paint and a paint spoon or spatula to just remove any kind of stubborn paint layers. 

Antique furniture restoration in Hobart is not an easy thing to do because antique furnishings are very fragile, so when doing so, you have to keep the fragility in mind. If you cannot, we are here with our antique furniture restoration service. Contact us today.